Abstract
One of the main aspects in understanding past cultures is the study and analysis of pottery works in ancient sites. The passage of communication routes such as the Khorasan highway during the historical period, especially in the Islamic period, has caused the emergence of many pottery cultures in this part of the country. Considering the influence of Hamedan pottery cultures and consequently the Qoroq site from large pottery areas of the Islamic period, in this research, an attempt is made to answer these questions. In terms of construction style and decoration, the effects of which areas can be seen in the pottery of Qoroq site? What are the most important types of pottery in this area from the 5th to 8th century AH? And which type of pottery has native characteristics? The main purpose of this writing is to identify the types of pottery indicators of the study site, which is done through the study of archaeological data obtained from modern surveys. In the present research, the descriptive-analytical research method and information gathering has been done in the form of library studies and field comparison of the findings of this area with other areas. The results show that the pottery art of this area can be seen in terms of construction and decoration techniques influenced by the art of neighboring areas such as Zolfabad, Aveh, Soltanieh, Takht-e Soleiman, Kangavar and Boroujerd. Also more than 10 types of pottery from the fifth to the eighth century AH have been identified, which include different types of unglazed and glazed pottery, each of which is divided into simple, patterned and multi-colored subsets under the glaze. In the meantime, specimens such as Dishes with multicolored decoration on white glaze probably have local characteristics.
Keywords: Qoroq Site, Hamedan, Typology, Pottery, 5th to 8th Century AH.

Introduction
Qoroq site is located 9 km north of Hamedan city, in the east of Bahar city. In terms of topography and geological features, this area is located in the alluvial, eastern and northern parts of the Alvand mountain valley habitat and in the middle of the vast and fertile plain of Hamedan (Fig 1 & 2). According to historical texts and archaeological evidence, Qoroq site is one of the leading cultural centers of the Islamic period, the peak of its prosperity is related to the seventh and eighth centuries AH (Fig 3). Surface studies on the pottery of the Islamic period of Qoroq site show that in this region, various known pottery styles have been prevalent in different regions of Iran. The Survey and analysis of various types of pottery index during the fifth to eighth centuries AH, The relationship of this area with neighboring areas and also the identification of local samples is one of the objectives of this Research. The most important research questions are: 1- In terms of construction style and decoration, the effects of which areas can be seen in the pottery of Qoroq site? 2- What are the most important types of pottery in this area? And 3- which type of pottery has native characteristics? According to the results of the research, underglaze and overglaze varieties with monochromatic and multicolor motifs are among the most important pottery works of this area. It is probably the multi-colored type on a white glaze background from the local pottery of the western regions of Iran in the 7th and 8th centuries AH. (Table 7 b). In the present article, the data are collected by documentary and field methods and the research approach is “descriptive-analytical”. The pottery pieces were studied by “sampling” method as “simple random” and based on “qualitative characteristics”.
Archaeological studies by faculty members of Bu - Ali Sina University in the region during the years 2006 to 2012 have referred to the pottery data of the Islamic period of this region and its flagship hills, including Qoroq site (Mohammadifar and Motarjem, 2006; Motarjem and Belmaki, 2009; Nazari Arshad, 2012). “Survey and analysis of the typology of pottery from the beginning of the Islamic period to the end of the Safavid period in Hamadan”; (Zarei and Shabani, 2019) is another research that has studied the totality of Islamic pottery in Hamedan province, including the Qoroq site, which has been obtained through excavations and studies.

Data
In this research, the pottery fragments of Qoroq Islamic site are divided into two groups of unglazed and glazed pottery. According to the type of decoration, unglazed pottery can be seen in three groups with molded decoration, incised pattern and added pattern. Glazed parts can be classified into two groups, monochromatic and multicolor. Also, according to the type of motifs and patterning method, it is divided into monochromatic motifs (carved, molded, embossed) and underglaze and overglaze motifs. Glazed pottery is divided into Sultanabad style, esgraffiato, black pen under turquoise glaze, silhouette, blue and white, Azure with gold decorations and several colors on white glaze (Table 1-7).
In the Islamic period, especially from the 3rd to the 8th century AH, historians and geographers have made important references to the routes between Hamadan and the neighboring regions, which can be known to some extent about the main and most important roads of this region and the neighboring regions. These routes are: 1- Hamadan-Holwan route (Istakhri, 1961: 163-162; Ibn Hoqal, 1987: 103-102; Ibn Khordadbeh, 1992: 24; Ibn Rosteh, 1892: 168-167; Maghdasi, 1982: 599-600; Mostofi Qazvini, 1957: 164) which passed through the western regions of the country, including the cities of Asadabad, Kangavar, Bisotun. 2- Hamedan-Qazvin route (Istakhri, 1961: 163), which passed through the cities of Razan and Avaj. 3- The southern road of Hamedan (Demeh road, Raman/Jarfadghan/Isfahan/Khuzestan) which was flowing from the cities of Jokar, Nahavand and Borujerd towards the southern and central regions of the country (Istakhri, ibid.: 163; Natanzi, 2013: 254). 4- The route from Hamedan to Saveh and Ray (Ibn Khordadbeh, 1992: 25; Ibn Rosteh, 1892: 168-167; Hamavi 2001, Vol. 1: 651; Katebe Baghdadi, 1991: 38-37) which passed through the eastern parts of Hamedan, including the villages of Gorgaz and Bozenjerd. 5- Hamadan-Soltanieh route (Mostofi Qazvini, 1957: 164; Hamedani, 2007: 126), the northern road that passed through the cities of Kabudarahang and Shirinsu.
Here, many similarities can be seen between the pottery of the Qoroq Islamic site and the examples found in the significant cultural centers within the region (Bashqortaran, Dargzin and Babakhanjar sites in the north, Arzanfoud and Troglodytic Samen sites in the south, and Qale juq site in the northeast). Also, the ability to compare some of the samples found with pottery from outside the region such as Qorveh, Kangavar, Bisotun, Garos, Aghkand, Soltanieh, Zalfabad, Tahigh, Aveh, Ray, and Borujerd has shown the connections of this site with its western, eastern, northern, and southern neighbors. Among these routes, which had a significant impact on the political, economic and cultural life of the region, is the Great Khorasan road that entered the Hamadan basin from the eastern parts of the plain.

Conclusion
According to the study of pottery left over from this area and the abundance obtained from them - as one of the cultural centers with valuable archaeological data - its peak of brilliance belongs to the Seljuk and Ilkhanid periods. Among the pottery fragments of the area, all kinds of single-color pottery (plain and patterned), underglaze and overglaze patterns typical of the western regions of Iran have been obtained. Among the types of glazed vessels, esgraffiato vessels with linear and simple geometric motifs repeated in the middle of the frame (spiral, zigzag, rhombus and triangular circle motifs) on a light green and cream background, and multi-colored decorated vessels on white glaze with mixed geometric motifs. (horizontal parallel lines, continuous crossed lines) and a simple plant (flowers with several leaves, mesbek and pichan) in the inner part is considered one of the most important types of local pottery of this place. Similar to the samples studied based on the construction technique, decoration method, color and shape in other pottery centers inside and outside the region, especially in the neighboring prominent areas which are on the most important communication routes from Hamedan to Kangavar, Bisotun, Qorveh, Soltanieh, Aghkand, Garos, Zolfabad, Tahigh, Aveh, Ray and Borujerd were placed, it has been popular. The designs used on the pottery have shown the extensive cultural relations of the population centers in the middle Islamic centuries. According to historical and archeological evidence, the main factor influencing the pottery art of this region from neighboring regions in the Islamic period was the trade and pilgrimage routes that entered the Hamedan plain from the east, central plateau, west and northwest. As can be seen, during this period, all exchanges from the most important city of Jebal, i.e. Ray, to the western regions of the country, including the Hamedan Plain, were carried out through the Khorasan road. Therefore, Hamedan is located in the center of one of the four important communication routes between north and south and east and west of Iran, and the similarity of the cultural materials of this region with other regions is due to its location in the chain of political, cultural and commercial communication in the west of the country.

Abstract
Urmia lake basin is one of the most important cultural basins known in the archeology of Iran and has had a significant contribution in the historical and cultural evolution of northwestern Iran. Urmia plain and its surrounding heights have a special place among them. Due to the favorable environmental conditions in the Iron Age, important settlements were formed in the Urmia Plain. So far, forty-seven sites related to the Iron Age III (850 to 550 BC) have been identified in this plain that classified in the two parts of the settlement sites of the plain (39 settlement sites) and the defensive castles around it (8 castles). Among the forty-seven sites of Iron Age III (850 to 550 BC), thirty-two sites were formed on previous settlements and fifteen sites were formed for the first time. Among the thirty-nine settlement sites belonging to the Iron Age III of Urmia Plain, thirty-one sites with an area between half and five hectares are small villages and settlements. Three Sites are between five and ten hectares and three Sites are between ten and fifteen hectares. The two site of Goy tepe and Dizaj-Takieh, with an area between fifteen and twenty-four hectares, are considered among the large sites of Iron Age III of Urmia Plain. The distribution of ancient sites in the studied area is not the same, and among the thirty-nine settlement sites that have Iron Age III layers, a limited number are located in the higher areas of the western, southern and northern belt, and the absolute majority of the settlements are located in the flat plain of Urmia. Most of the settlement sites (about 76%) are less than a thousand meters away from water sources and rivers, and this shows that the water factor is the most important factor in the location selection of settlements in this era. During most of this period, Urmia region was considered one of the Urartian states. The results obtained from the analysis of GIS maps show that despite the pattern of Urartian settlements, which tends to settle and administrative management in mountainous and higher areas, the main and residential settlements of this era were formed in the lowland and their management was only in Military forts were located in higher peripheral areas.
Keywords: Urmia Plain, Iron Age III, Settlement Patterns, Urartu, Mana.

Introduction
Urmia plain is one of the fertile areas in the northwest of Iran, and therefore it has been the focus of human societies from the past until now, and the evidence left behind, such as numerous historical hills, testify to the establishment and exploitation of this plain in different prehistoric times. And it is historical. Even though the archeology teams have investigated the Urmia plain in the past and identified important sites, but most of them only identified and registered the sites And they have not provided chronological and analytical information related to the trajectory of the formation and expansion of Iron Age III sites And this issue has caused the failure to present a detailed map of the pattern of settlements and the state of the sites in this period. Therefore, studying the state of settlements, their formation and expansion can be effective in understanding the cultures and settlement patterns of this period in this great plain. The archeological survey of Urmia Plain was conducted with the aim of identifying and investigating the ancient sites of the Iron Age III and also studying settlement patterns in two seasons in the fall of 2019 and the spring and summer of 2020. The present article, by examining the sites of Iron Age III in the Urmia plain, studied the formation and expansion of the sites according to variables such as height above sea level, water sources, distance and proximity to rivers and vegetation And based on their size, they are ranked and finally, it analyzes and reconstructs the regional landscape of Urmia plain in the Iron Age3 and the environmental patterns of the settlements of this period.

The text of the article and the main discussion
The beginning of the Iron Age III in the important settlement areas of northwestern Iran, including Hasanlu, has been determined following the massive fires that occurred at the end of the Iron Age 2 and led to the destruction of the settlements of this period. Chronologically, this era coincides with the emergence of a new pottery phenomenon, which Young (Young 1965:70) called the new Buff Ware horizon, that appeared in many sites in western Iran. Based on this, in the northwest of Iran, especially in the Urmia lake basin, the Iron 3 period has been introduced at the same time as Hasanlu layer 3. Urmia Plain, as the largest plain on the western shore of Lake Urmia, witnessed extensive changes in the first millennium BC. The importance of the Urmia plain, and its location at an important crossing in the first half of the first millennium BC, has caused the attention of the governments of Urartu, Assyria and even Manna. Urmia Plain in the Iron Age III due to these favorable environmental conditions, especially the flow of permanent and abundant rivers, numerous springs, suitable and fertile land, rich pastures and abundant hunting, has received more and more attention and received a significant population. A population that relies on agricultural livelihood more than anything else, and the location of settlements has been done near stable water sources and main rivers And these places have been chosen according to the topography, slope and type of soil so that water supply to the land can be done easily and also have fertile soil. Among the forty-seven sites of Iron Age III (850 to 550 BC), thirty-two sites were formed on previous settlements and fifteen sites were formed for the first time in this settlement period. Among the thirty-nine settlement sites, thirty-one sites have an average area between half and five hectares, six areas have an area of between five and fifteen hectares, and two areas have an area between fifteen and twenty-four hectares. Among the four major settlement and non-settlement sites of this region, namely Goy tepe, Bari, Ismail-Agha Castle and Dizaj-takiyeh, two sites of Ismail-Agha Castle and Bari Castle are located in the mountainous areas overlooking the Urmia Plain And as fortresses and defensive fortifications, and two settlement sites, Goy tepe and Dizaj-takiyeh, have served as the central places of the plain. By looking at the distribution map of the settlements of this era and paying attention to geographical variables such as distance and proximity to water sources, agricultural lands and the size of the areas, the pattern of settlements in the region can be determined. Most of the sites are formed in the plain. Considering that water has always played an important role in the formation of these establishments and is considered an important indicator for their analysis, It is obvious that the flat areas and near permanent springs and rivers have been given more attention by these tribes. The higher areas of Urmia region have fewer settlements. These settlements can be considered as seasonal settlements, because they were forced to leave the place immediately when the amount of water decreased. Therefore, it seems that the permanent settlements are mainly formed along the permanent rivers. Other geographical variables such as distance and proximity to fertile and suitable agricultural lands and altitude above sea level are effective in this increase in population and settlements.

Conclusion
Among the 187 hills and historical sites identified in Urmia Plain, forty-seven sites from the Iron Age have been identified. Two pottery traditions have been identified, including the Urartian pottery tradition and the local pottery tradition with simple Buff Ware with the influence of late Manna pottery. In addition, suitable environmental conditions have made the Urmia plain one of the main agricultural areas of Azerbaijan, so that this area is considered one of the key areas in the development and population increase in the northwestern plateau of Iran (Biscone 2003:167). Settlement patterns in the Urmia Plain, including residential settlements in the bottom of valleys and low plains and close to fertile lands and water sources, especially permanent and abundant rivers in the region and the creation of fortresses and defense fortifications in the higher parts and on top of the rocks. The establishment of residential centers in the Urmia plain was done during the dominance of the Urartu in the alluvial lands of the plain And the main military centers have been built in the form of strong fortresses in the surrounding heights of this plain and The small sites in Urmia plain, which are less than nineteen sites and their size is less than three hectares, are residential units and small villages that were engaged in agriculture And other settlements of this era in the Urmia plain, which number up to eighteen settlements, are between three and fifteen hectares in size. And they are managed by two large and central sites, Goy tepe and Dizaj- Takiye. Therefore, according to Chrystaller’s model, Goy tepe, as the largest settlement site in the Urmia plain, controlled the central and northern sites of the plain, and Dizaj- Takiye, in the second place in size, controlled the southern sites of the Urmia plain.

Abstract
It is possible to study the climate adaptability of past and present architecture by benefiting from the sciences of archeology, architecture, geography, applied climatology and paleoclimatology. Conducting such studies in connection with the complex of Persepolis in Marvdasht plain belonging to the Achaemenid period adds new information to the scope of our knowledge of the architecture of the mentioned period. The current research seeks to evaluate three main questions: 1) What were the physical components of the architecture of Persepolis complex in order to adapt it to climatic conditions? 2) How effective were these components in line with the mentioned issue? And 3) What were the non-physical heating or cooling arrangements of the complex? The necessary information has been collected by library and field methods and analyzes of four software, AutoCAD, Climate Consultant, Ecotect, and DesignBuilder in the field of energy and architecture and processed in a descriptive-analytical way. The physical components of the architecture of the complex include its orientation towards the south with a northwest-southeast stretch, high density and height of buildings and the creation of passages with a small width, the use of mud-brick in the construction of walls and the creation of a flat covering of wooden beams, the installation of side doors and windows in the walls. South in most of the buildings are the construction of the pillared porch at the entrance of most of the buildings. These components are effective in using the radiant heat of the sun to heat the residents in some hours in the time range from October to April. However, the application of these solutions from November to March (1632 hours in total) is not enough, and heat production was needed. Probably, in order to achieve thermal comfort, the residents had time management in holding gatherings and used non-physical heating arrangements similar to portable open fire-place from the palaces of the Assyrian Empire. Finally, the climatic adaptability of the complex to the Marvdasht plain and the adoption of suitable heating and cooling measures in it have ensured the thermal comfort of the residents.
Keywords: Environmental Archeology, Persepolis Complex, Thermal Comfort in Achaemenid Architecture, Climatic Adaptability.

Introduction
Creating ecological stability between man-made and nature is necessary for the continuation of life. Architecture is one of the aspects of human life that has a direct relationship with climatic conditions. The formation of native architectural styles throughout history shows the extent of knowledge of the ethnic groups from the climatic conditions of the surrounding environment, which is based on the reading of the geographical, historical and social background of the region (Moazzen & Sad berenji, 1400: 168). When the climatic conditions in a region are favorable, human life is formed and continues there. These conditions are different in different parts of the world and it is necessary to use elements in the architectural body of the building with the aim of complying with the mentioned conditions. Archaeological evidence shows that humans have been aware of this issue since prehistoric times and have taken steps towards the optimal use of natural factors and reducing their negative consequences. The architecture of the residential and religious buildings discovered in Tepe Zagheh (Malek Shahmirzadi, 2011: 326-327) and the architectural works obtained from the V cultural period of the Tepe Sagzabad (Talaei, 2015: 145-145) are proof of such knowledge. By adopting suitable cooling and heating measures in the architectural body of the building, a mental condition is created in the residents that express their satisfaction with the thermal conditions of the environment, and it is called the thermal comfort range (Hejazizadeh & Karbalai Darei, 2014: 22).
Historical documents and archaeological data related to the Achaemenid Empire have been discovered from different parts of their territory, and architectural remains are among these discoveries. The architectural complex uncovered in the vicinity of Persepolis in Marvdasht plain is one of the architectural remains left over from the Achaemenid period. The architecture of this complex is in a way that has certain proportions and the Peymoon system (Javnmardi & et al., 2018: 123). The architectural body of each building must match the climatic conditions of the surrounding environment as much as possible in order to ensure the thermal comfort of its inhabitants. If the physical adaptability of the architecture is not enough, cooling and heating measures are taken to produce cold or heat in the building. The problem of the current research is to know the physical components of the architecture and the heating and cooling solutions thought in the architecture of the Persepolis complex in accordance with the climatic conditions of the Marvdasht plain, which can bring information about the adaptation of the architecture to the climatic conditions in the Achaemenid period.

Identified Traces
The physical components of the Achaemenid architecture of Persepolis, in order to implement these arrangements, include the orientation of the complex in relation to the azimuth of sunlight towards the south with a northwest-southeast extension, which is exposed to an average of the maximum amount of solar radiation energy and its optimal value. Due to the gradual construction of the complex, the high density and height of the buildings has caused the creation of passages and two courtyards with a small width, which has reduced the area of the movement field of unfavorable winds, shading the openings on hot days and causing a lot of failure in the passages. The use of mud-brick in the construction of walls and the creation of a flat covering of wooden beams with a large thickness, which has a high capacity and thermal delay, prevents the loss of heat on cold days and reduces the entry of heat from the outside into the interior of buildings on hot days. Installing openings in the northwest-southeast azimuth is an average of the maximum radiant heat (east) and optimal (east-west with south view) azimuths, and the amount of heat received from sunlight is suitable for hot and cold days of the year. Most likely, the doors and windows are closed on cold days. The construction of pillared porches in most buildings also played a role in adjusting the air inside. Applying these solutions in most of the hours from November to March, which is calculated as a total of 1632 hours, is not enough to ensure the thermal comfort of the residents of the complex, and heat production is needed.

Conclusion
Considering the great and well-studied achievements of the architects and master craftsmen of Persepolis in various architectural, technical and artistic fields, it is expected that they will have significant achievements in the field of adaptation of architecture to the environment and heating and cooling arrangements. Based on the analysis of the climatic conditions of Marvdasht Plain and the thermal comfort of its residents, it is more necessary to comply with the heating measures compared to the cooling measures in the architecture of a building in the mentioned area for climate adaptation and providing the thermal comfort of the residents. Natural heating measures include the use of heat from sunlight, which relieves the cold stress of the residents in some hours in the time range of October to April. The cooling arrangements also include shading on the openings and natural air ventilation, which provides thermal comfort to the residents from April to May and from September to October in some hours and in the middle days of the two mentioned periods at all hours of the day and night. There was no need for cooling during the year. In this collection, wall-mounted heaters similar to the examples of the third floor of Babajan Tepe Lorestan have not been identified. For this reason, it is likely that the inhabitants used portable metal fire-place similar to the Assyrian types and provided the necessary heat. Finally, the present research shows that the architects of Persepolis complex, as well as having mastered various architectural techniques, also had sufficient knowledge in relation to various aspects of climate adaptability and the adoption of heating and cooling measures in order to ensure the thermal comfort of the residents in different months of the year.